eggheadforum.com

Egghead Forum

forums | help

Post a reply to in "EggHead Forum"

Name/Handle:

email*:

Subject:

topic icon:

boardcode:

Color: Size: Close all tags

Message:

emoticons

Guests, please use the guest password found in the grapic below.
Members, please enter your username and password.

Username:

Use my handle.

Password:

Guest Password:

* - your email address will only be available to registered users.

Topic History of: Mad Max Turkey questions/problems
Max. showing the last 6 posts - (Last post first)

Author	Message
Jeffersonian	I'm betting it's the overhang from the plate setter, too. Like you, I didn't lack for basting liquid, but the edges where the pan extended beyond the plate setter did get very dark. I rotated the pan 180 degrees in mid-cook so they didn't burn black. Could Hare's problem be probe placement?
East Cobb Eggy	Hustling Hare, WOW!! I had the same exact problems on Thanksgiving with my MM Turkey. I think it might be due to too much lump. Additionally, I could not get my pan off of the placesetter with the BGE feet due to space. I will probably try a different method. In my experience, my turkey was overdone in about 3 hours. Although overdone, the BGE saved me by providing a moist product. However, the gravy was absolutely awful. It was burnt and disgusting. This time, I think I will try less lump at a lower temperature. Additionally, I have invested in a Polder thermometer to allow me to monitor the temperature more closely. Wish me luck. Greg
Big'un	Hustling Hare, The first things that jump out at me; \"Is there a plate setter or pizza stone? Is there enough airflow between the pan and the plate setter?, Is the turkey sitting flat on the pan, or is it raised off the pan by carrots and/or celery. When you do replace liquid into the pan does one spot inparticular, boil and sizzle? \" If your Egg temps/readings are correct,then it sounds as though you are cooking direct, rather than indirect. What kind of pan are you using?, and can you add a disposable pan underneath with some rolled up alum foil to creat more airspace and further insolate your pan from direct heat?HTH. Big'un
Michael B	Hustling Hare, > I filled the Large almost to the top of the fire ring > I can't keep liquid in the pan. It all evaporates. With your drippings burning off that fast, you have got to have some significant heat on the bottom of your pan. You can check this by setting up your cook and placing an oven thermometer in the pan instead of the turkey. Or put 2 cups of water in there and I bet you’ll see it boil at the hot spots. This condition will also turn your roasting pan into a high temp oven within your Egg. Try starting with less lump. Filled as you say, you're putting 1000+ degrees within an inch of your barrier and the exposed portions of your pan. Only filling to the top of the fire box, and maybe a little less than that, will significantly reduce the intensity of the direct heat you are getting.
Mike in Abita	Hustling Hare, If I may, and by no means am I a MM expert. Hey I've only done one MM turkey. If I were experiencing the problems/scenerios you speak of, I would definetly cook my bird at a lower temperature. Seems like the 325 works for some and not others. May be your pan or location in the egg. Just my $.02 Mike
mad max beyond eggdome	Hustling Hare, i guess the pan corners being in the hot air flow could be an issue. .. .maybe try making a 'tray' of aluminum foil, and laying that on your plate setter with the green feet on top of that, so that the foil extends past the corners of your pan thereby giving you a little more 'barrier' between heat and the roasting pan. .. .and don't be bashful with the liquid... . i can tell you that between the butter, wine and juices in my 22 pound turkey this year, i ended up with over 4 full cups of liquid in my pan when the bird was done (i know this because when i poured the contents of the pan into a 4 cup measuring pitcher to separate the fat, it overflowed. ...

Member Login