Member Login

Do I have to register?
Username

Password

Remember me
Forgotten your password??
No account yet? Create one
Have a profile? Activate it
Home arrow Forums arrow EggHead Forum
SPECIAL EVENTS    
*** NEW - The Texas Pete Ultimate Tailgate Contest ***
The Texas Pete Ultimate Tailgate Contest
EGGFEST CENTRAL    
*** NEW! - Sunshine State Eggfest - March 12 & 13, 2010 ***
Sunshine State Eggfest - March 12 & 13, 2010
Egghead Forum
Egghead Forum
Boardwalk :: Forum ListEggHead Forum
::post new topic::

Return to index

Heating the BGE for Pizza
Date: 2007/08/19 12:31 By: SteveinSpokane Status: Visitor  
 
I am having trouble sustaining a 650 degree plus temperature for 45 minutes, which is recommended for preheating the pizza stone prior to baking. By the time I get the temp up and wait the recommended time, the coals are spent, and the temp starts to fall just when I want to begin! I tried more charcoal but only proceeded to burn the gasket. Any help is greatly appreciated.
reply | quote

Heating the BGE for Pizza
Date: 2007/08/19 12:38 By: hayhonker Status: User  
 

Gold Egger

Posts: 913
graphgraph
[img size=1024]http://www.jasonandwendy.com/egg/pizza.jpg[/img]
SteveinSpokane,
In my experience as long as you put the pizza stone in right after you light the coals, it will be up to temp as soon as the thermometer says so. Just wait for the white smoke to clear and your pizza will be done in a few minutes.

Good luck!
Click here to see the profile of this user reply | quote

Heating the BGE for Pizza
Date: 2007/08/19 12:48 By: Morro Bay Rich Status: User  
 

Platinum Egger

Posts: 1012
graphgraph
SteveinSpokane,
First off, 550 degrees is pizza temp; 650 is too high. Put plate setter in legs down. Put spacer between plate setter and pizza stone. That will elevate stone above gasket level. Fill firebox with lump. Light lump and immediately put all the ceramic mass in Egg. When temp hits 550 wait about 20 min for everything to get that hot.

You are not putting enough lump in if it is gone in 45 min.
Click here to see the profile of this user reply | quote

Heating the BGE for Pizza
Date: 2007/08/19 12:50 By: RRP Status: User  
 

Platinum Egger

Posts: 9388
graphgraph
SteveinSpokane,
if you are consuming all your lump in 45 minutes at 650 degrees then you are not putting in enough lump to began with. Don't believe that 2 or 3 handful crap. Fill up to a least the bottom of the firering and then some more. No harm no waste because you'll snuff the fire and reuse what's left. OTOH 650 for pizza is kinda hot - are you sure you want that hot? I have found 500 works fine for me. Good luck.
Click here to see the profile of this user reply | quote

Heating the BGE for Pizza
Date: 2007/08/19 14:17 By: Jwirlwind Status: User  
 
Newbie Egger

Posts: 0
graphgraph
SteveinSpokane,
Personally, I would not get over 450 to 500 to cook a pizza. That is all the heat you need. Actually, 400 will do just fine and not burn the bottom of the pizza and not scortch the gasket.
Just my opinion.

MC Jerry
Click here to see the profile of this user reply | quote

Heating the BGE for Pizza
Date: 2007/08/19 15:09 By: icemncmth Status: User  
 

Platinum Egger

Posts: 1535
graphgraph
Morro Bay Rich,

Uhh...650 too high...Not really ...most pizza is cooked at 800 deg..or more...

I cook mine on the egg bottom vent wide open and no daisy wheel...

I load the lump past the fire box about half way up the ring..then go from there...

I can cook 6 pizzas very easy doing this..and it only takes around 4 1/2 mins each

A true neapolitan pizza is cooked at around 1200 deg..
Click here to see the profile of this user reply | quote

Heating the BGE for Pizza
Date: 2007/08/19 15:13 By: icemncmth Status: User  
 

Platinum Egger

Posts: 1535
graphgraph
Jwirlwind,

The reason pizza is cooked at 800 deg and higher is because you are trying to quick bake the crust..This will allow the yeast to expand quickly and the crust to form keeping the steam on the inside of the dough allowing it to keep the dough soft.....

The reason people at home cook pizzas at 500 or less is home ovens don't go over 500deg ..600+ is the cleaning cycle.
Click here to see the profile of this user reply | quote

Heating the BGE for Pizza
Date: 2007/08/19 15:44 By: SpokaneMan Status: User  
 
Newbie Egger

Posts: 0
graphgraph
Listen to iceman on the temp. If you are going for neapolitan, you need high temps and he's one of the pizza experts on this forum.

I had mine at 740 for well over an hour Thursday night without any temp loss and there is still plenty of lump left over.

As others have said, you probably aren't using enough lump. Spokane isn't the place to find high quality lump so it could be your brand. I use a good layer of Kingsford and then top it with Cowboy. The Kingsford is pretty dense and seems to burn longer and hotter. The problem is that it sparks a lot so that's why I top it with Cowboy.

What do you use? Do you know of anyplace around here that has other brands? I don't want to pay $21 for BGE downtown.

Where are you in Spokane? I thought I was alone.

Click here to see the profile of this user reply | quote

Return to index
Boardwalk :: Forum ListEggHead Forum
::post new topic::